R.R International was founded in 2004. It stands among the leading brands and is a reliable dealer of paint.We have our own manufacturing plant M/S Ralston polycoats

Contact Info

Get A Quote
×
img

Epoxy Zinc Primer

img
img

Epoxy Zinc Primer

Epoxy Primer R 4:1 is a two-component polyamide cured general purpose epoxy Zinc Phosphate base coating for protection of metal and concrete surfaces in a wide range of industrial & atmospheric conditions. The quality has satisfactory resistance against Fumes, Spillages of Mild Acids, Alkalis, Salts & amp; solvents

img

SURFACE PREPERATION

  • STEEL SURFACES
    If blast cleaning is not practical, make full use of mechanical tools along with the manual cleaning and wire brushing to remove loose rust particle. Surface should be perfectly clean and before applying primer.
  • CONCRETE SURFACES
    For a new Concrete Surfaces. Ensure that the surface is cured for a minimum of 2 months. Remove laitance, loose surface particles by wire brush if affirmance(white powder) is present surface by Acid Etching with 10% hydrochloric acid solution followed by thorough Freshwater spray to remove any residual acid. The surface should be perfectly dry and clean before applying primer
  • FOR OLD CONCRETE SURFACE
    Remove grease, oil etc. by solvent wiping. Remove water-soluble contaminant by fresh water hosing. Roughen the surface by acid etching, The surface should be perfectly dry and clean before applying primer.

Product Information

COLOUR RED, GREY
FINISH EGGSHELL
FLASH POINT 29^OC
MIXING RATIO BASE: ACCELERATOR R 4:1 (BY VOLUME)
% SOLID BY WEIGHT 70-75%
RECOMMENDED DRY FILM THICKNESS 30-40 MICRONS PER COAT
CORRESPONDING WET FILM THICKNESS 60-80 MICRONS
PRACTICAL SPREADING RATE 60 TO 80 SQ. FT. /LTR.
DRYING TIME SURFACE DRY 1 HOUR, TECK FREE – 2
HOURS
HARD DRY– 12 HOURS
STORAGE LIFE UPTO 12 MONTH SO LONG AS THE MATERIAL IS STORED IN SEALED CONTAINER UNDER STANDARD WAREHOUSE STORAGE CONDITIONS.
HEAT RESISTANCE UPTO 150O C (INTERMITTENT)

APPLICAION DETAILS:

  • METHOD OF APPLICATION
    Brush or Spray
  • USES
    Specially designed for use on: Machine ,Structure & Pipelines in Paper & Pulp, Fertilizer Plants, Food & Pharmaceutical Plants etc

CHEMICAL RESISTANCE GUIDE

EXPOSURE Acids Alkalies Solvents Salt Water
SPLASH & SPILLAGE Good Good Good Excellent Good
FUMES & OUTDOOR EXPOSOURE Good Good Good Excellent Good
img
img
img