R.R International was founded in 2004. It stands among the leading brands and is a reliable dealer of paint.We have our own manufacturing plant M/S Ralston polycoats

Contact Info

Get A Quote
×
img

Epoxy Regular Shade

img
img

Epoxy Regular Shade

American Colour presents a top-tier, high-performance coating: the two-part solvent-based epoxy coating, formuX a premium quality zinc phosphate base. This exceptional coating is meticulously designed to offer maximum protection, effortless application, remarkable gloss, long-lasting color retention, excellent resistance to chemicals and water, as well as superb adhesion to metal, concrete, and wood surfaces. The product is conveniently available in a chemical ratio of 3:1.

img

Features

Interior Application:

  • Water Resistance
  • Moisture Resistance
  • Solvent Resistance
  • Salt Spray Resistance
  • Alkali Resistance
  • Low VOC
  • Poor Exterior Stability
  • Poor Stability at Higher Temperature
Product Features

Features of our
Product

01

Coverage

80 to 120 sqft / 12 kg kit THICKNESS -0.75 to 1mm

02

THINNER

Epoxy Thinner

03

COLOURS AVAILABLE

White & Furniture Colour

04

PERCENTAGE SOLID

62-65%

05

VEHICLE TYPE

Epoxy Resin, Polyamide Curing Agent

06

VISCOSITY

110-120 seconds in Ford CUP B4 at 30OC

07

SOLVENT TYPE

Epoxy Thinner

08

RECOMMENDED NO OF COATS

1 to 2 Coats

Uses

  • Interior furniture and equipment, chemical plants, pharmaceutical plants, textile plants, refineries and on concrete where chemical, oil, grease, water and maximum abrasion resistance are required.
  • In water storage tank and swimming pool where maximum water resistance is required.
  • Interior storage tank and structure.
  • In pharmaceutical industries where antifungal requirements are necessary. [Not recommended for application on exterior surfaces and places where temperature reaches above 70°C]

PRIMER RECOMMANDATION

  • Epoxy Red-Oxide Primer for Steel
  • Epoxy Sealer for Wood and Concrete
  • Zinc-Etch Primer for Aluminium and Galvanized Tops

SURFACE PREPRATION & MIXING INSTRUCTION

  • All surfaces must be dry, clean and free from oil, grease, dirt, loose/flecking paint, and other foreign substances.
  • Mix Base Part A and Hardener Part B separately with good agitation, and add Hardener part B into Base Part A and mix thoroughly until homogeneous.
  • Allow the reaction to complete for about 15 min. (induction time). If thinning is necessary, add thinner after 15 min induction time. [Mixing ratio of A: B is available in 3:1 ratio.]

DRYING TIME

Drying Time at 30°C & 50 RH- Surface Dry 30 min., Tack Free 1.0 hrs., Hard Dry 6-8 Hrs. [Low temperature, High humidity, Thickness of film, and Poor Ventilation will increase drying time].
img
img
img