R.R International was founded in 2004. It stands among the leading brands and is a reliable dealer of paint.We have our own manufacturing plant M/S Ralston polycoats
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic, dust-free and attractive floor finish that is suitable for a variety of industries. This three-component system consists of a carefully designed solventless epoxy resin composition, hardener and hard-wearing quartz fillers. It provides an extremely smooth, glossy or semi-glossy, hard-wearing and chemical-resistant floor topping.
Distinct advantages that make it an ideal choice for your flooring needs:
Custom shade can be made to order
Gloss / Semi-gloss
12 months at 30°C
Initial cure in 6 hours Full Mechanical Cure in 48 hours Ready for use (To walk) in 24 hours Ready for use (light traffic) in 48 hours
1.6 kg/m² at 1 mm thickness
3.35 kg/m² at 2 mm thickness
5.25 kg/m² at 3 mm thickness
18 KG pack size:
Part A 4 kg
Part B 2 kg
Part C 12 kg
Spread the mixture on the floor immediately to the required thickness by means of rollers and serrated trowels. The floor should be rolled by a spike roller to remove trapped air. The floor shall self level to uniform colour and smoothness.
Recommended for areas which require maximum hygiene, chemical resistance & dust-free environment like:
| Application: | Serrated Trowel |
|---|---|
| Mixing Ratio: | As supplied |
| Pot Life at 30°C: | 25-30 mins |
| Compressive strength (ASTM C 579): | 60 MPa |
| Hardness, Shore D (ASTM D 2240): | 80 |
|---|---|
| Taber Abrasion Loss/1000 Cycles: | 45 mg |
| Flexural strength (ASTM C 580): | 40 MPa |
| Tensile strength (ASTM C 307): | 30 MPa |
Keep the containers tightly sealed when not in use. Avoid skin contact and inhalation of fumes (if any). While spraying it is advised to wear a mask. If it comes in contact with the body, wash affected parts with plenty of water. In case of persistent irritation, contact a physician.
EPOXY FLOOR GUARD SL SKID
EPOXY FLOOR GUARD SL shall be mixed and applied only by specialist flooring contractors who have been trained in the correct application procedures.
Store in dry conditions between 5°C and 30°C, away from sources of heat and naked flames, in the original, unopened packs. If stored at high temperatures the shelf life will be reduced
For use over a concrete surface, FLOOR PRIME EP primer is recommended depending on substrate condition to ensure maximum product performance.
