R.R International was founded in 2004. It stands among the leading brands and is a reliable dealer of paint.We have our own manufacturing plant M/S Ralston polycoats
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic, dust-free and attractive floor finish that is suitable for a variety of industries. This two-component system consists of a carefully designed solventless epoxy resin composition and hardener . It provides an extremely smooth, glossy or semi-glossy, hard-wearing and chemical-resistant floor topping.
Distinct advantages that make it an ideal choice for your flooring needs:
400-600 SQFT / 6 KG KIT THICKNESS -150 TO 300 MICRO
Gloss / Semi-gloss
CLEAR TRASPARENT
Initial cure in 6 hours Full Mechanical Cure in 48 hours Ready for use (To walk) in 24 hours Ready for use (light traffic) in 48 hours
Spread the mixture on the floor immediately to the required thickness by means of rollers and brush
12 months at 30°C
Recommended for areas which require maximum hygiene, chemical resistance & dust-free environment like:
| Application: | Serrated Trowel |
|---|---|
| Mixing Ratio: | As supplied |
| Pot Life at 30°C: | 25-30 mins |
| Compressive strength (ASTM C 579): | 60 MPa |
| Hardness, Shore D (ASTM D 2240): | 80 |
|---|---|
| Taber Abrasion Loss/1000 Cycles: | 45 mg |
| Flexural strength (ASTM C 580): | 40 MPa |
| Tensile strength (ASTM C 307): | 30 MPa |
Keep the containers tightly sealed when not in use. Avoid skin contact and inhalation of fumes (if any). While spraying it is advised to wear a mask. If it comes in contact with the body, wash affected parts with plenty of water. In case of persistent irritation, contact a physician.
Pre-weighed pack components ensure optimal performance—never split them. Mix the Base first, then add the Curing Agent and aggregates, blending for 1-2 minutes each. Use a slow-speed drill with a helical spinner for 2 minutes, avoiding high-speed mixing to prevent air entrapment..
EPOXY FLOOR GUARD SL shall be mixed and applied only by specialist flooring contractors who have been trained in the correct application procedures.
Store in dry conditions between 5°C and 30°C, away from sources of heat and naked flames, in the original, unopened packs. If stored at high temperatures the shelf life will be reduced
For use over a concrete surface, FLOOR PRIME EP primer is recommended depending on substrate condition to ensure maximum product performance.
