rasik@americancolour.com 08043816619

PU PAINT AUTO WHITE GLOSS R 3:1(1 LTR KIT, 4 LTR KIT)

Back to Catalog PU-PAINTS
PU PAINT AUTO WHITE GLOSS R 3:1(1 LTR KIT, 4 LTR KIT)-image

PU PAINT AUTO WHITE GLOSS R 3:1(1 LTR KIT, 4 LTR KIT)

₹767/1 ltr , 2832/ 4ltr

View Complete Details

Get Latest Price Request a quote

    PU Paint 1 Ltr and 4 Ltr Specification

    Brand American Colour
    Packaging Sizes 1 LTR AND 4 LTR
    Packaging Type Tin
    Appearance Free flow colored liquid
    Thinner PU Thinner
    Flash point 20'c
    Viscosity @ 30'C 120 +/- 10 SECOND
    Solid content 63%
    Application Condition:
    Air temperature    		 10 to 40'C
    Application method Brush, roller or spray
    Mixing/Dilution Ratio
    ( 13-15” FC # 4)    		 Base:Hardener:Thinner
    30 10 20- 30
    Pot life 1 ~ 3 hrs.
    Drying time:
    Dust free
    Touch dry
    Hard dry
    Recoat    		 15-20’
    30-45’
    2-3 hrs
    After 12 hrs
    Coverage 50 to 60 sqft/ ltr
    Pencil hardness HB-H
    Recoating One coat may be sufficient for ordinary finish. However, one additional coat
    can be applied wet on wet if necessary. Light sanding with 400 ~ 600 mesh
    sandpaper is recommended before subsequent coat when recoating time
    exceeds 3 hrs and remove traces of wax
    Uses

    ● House furniture
    ● Excellent for wood, metal, & aluminum

    SURFACE PREPARATION & MIXING INSTRUCTIONS

    1. Prepare the surface: Ensure that the surface to be coated is clean and primed with a
      suitable sealer or primer.

    2. Clean and sand the surface: Thoroughly clean the surface, removing any dust, oil, water, or
      other contaminants. Additionally, sand the surface well to create a smooth and even base.

    3. Apply the first coats: On the well-prepared surface, apply 1 to 2 coats of PU AUTO GLOSS
      PAINT. Apply the paint in both horizontal and vertical strokes to ensure even coverage.

    4. Sand for a perfect finish: Once the initial coats have dried, use a very fine sandpaper to
      lightly sand the surface. This step helps to achieve a flawless finish. After sanding, remove
      any dust or debris from the surface.

    5. Repeat the top coating process: Apply another coat of PU AUTO MATT PAINT to the
      sanded surface. Follow the same technique of applying the paint in horizontal and vertical
      strokes.

    ADDITIONAL INFORMATION

    1. CLEANING OF TOOLS

    All tools should be cleaned with Wash Thinner or PU Super Thinner as soon as possible.

    2. STORAGE CONDITIONS

    Shelf life of 12 months minimum if stored below 25'C

    3. PRECAUTIONS

    PU AUTO GLOSS PAINT R 3:1 and PU HARDNER do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU AUTO GLOSS PAINT is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.

    Category: PU-PAINTS