Exterior latex paints american colour

Packaging Type: Bucket

High Performance Legacy Acrylic Latex Paint Specification

Product Description

High-quality acrylic latex paint pigmented to produce 
(1) Semi-Gloss finish 
(2) Satin finish or 
(3) flat finish on exterior walls, doors, trims may be applied to properly prepared wood, hardboard, 
masonry and on primed metals or on sound painted surfaces.
Features
• Resist Cracking and Fading
• One to Two coat coverage
• Low-Temperature Application at 5°C and higher
• Excellent adhesion
• Mildew Resistance - This product contains a preservative which inhibits the growth of mildew on the surface of the paint film
• The product is ready to use no other additive is required top
Surface Preparation
• Surface must be clean, dry and free from dust, grease, mildew, and wax. Remove any loose/peeling parts and prime with water base Acrylic Exterior Primer. If the surface is glossy it should be sanded to a dull finish.
• If mildew is present on the surface should be washed with chlorine bleach solution (20% household bleach and 1% liquid detergent in warm water)
• If concrete is new then allow for 30 days prior to application
• The PH of concrete should be less than 10, check with PH paper. If the surface is not within the 10 PH and a large amount of efflorescence (seen as a white salty deposit on the concrete surface) are present then the concrete should be acidly etched prior to painting (etching solution is 1 part of commercial HCL and 10 parts of water mix). Apply the wash uniformly then wash with clean water and allow the surface to dry.