Synthetic Enamel Paints (Glossy)( 1 ltr, 4 ltr , 20 ltr )
₹240/1 ltr, 900/4 ltr , 4248/20 ltr
Synthetic Enamel ( Glossy )Paints Specification
Packaging Size | 1 ltr , 4 ltr , 20 ltr |
Brand | AMERICAN COLUR |
Product Description
- Durable premium quality low VOC Alkyd enamel for use on drywall, plaster, masonry, prime wood such as trim, moldings, and door, machinery, piping, storage tanks, and equipment
- Its application properties which include excellent flow, leveling, toughness and fast dry provide maintenance with minimum interruption
Recommended Primer:
- Synthetic oil base rust inhibiting Red-Oxide primer for steel
- Synthetic oil base white primer for wood and masonry
Surface Preparation:
- All Surfaces must be dry, clean, and free from oil, grease, dirt, mildew, efflorescence, loose and flaking paint and other foreign particles
- Concrete, plaster, and masonry – prime with latex base primer, if new then allow curing for at least 30 days prior to painting and pH must be lower than 10
Feature:
- Durable & semi-gloss
- Interior & exterior Uses
- Excellent flow & leveling
- High Hiding
- Soap & Water Resistance
- Good abrasion resistance
- Easy application by brush, roller or spray
- Excellent resistance to grease, oil, and water
- High Solid & Low VOC
Dry Time: At 30 C and 50 RH:
- Surface Dry: 30-45 min
- Tack Free: 3 -4 Hours
- Hard dry: Overnight
- Low temperature, high humidity, the thickness of the film and poor ventilation will increase this time
Note:
- Water-based latex primer is more resistance to the alkaline surface (i.e. a higher pH surface) compared to alkyd base primer, therefore concrete, masonry, and plaster always give better result by using water based latex primer
Technical Description:
Finish | Glossy |
Colour | White and all decorative colours |
Clean-up Thinner | Mineral Spirit |
Sp. Gravity | 1.1-1.2, Varies on Colour |
Percentage Solid | 48-53, It depends on Colour |
Practical Coverage | 80-100 sq.ft/lit or 350-400 sq.ft/gallon at 30-40 micron dry film thickness. It also depends on the substrates and the method of application |
Viscosity | 100-120 Sec. in Ford Cup B4 at 30C |
Thinner | Mineral Spirits |
Flash Point | 40 C |
Additional Information
Item Code | 32089022 |
Packaging Details | 1 LTR, 4 LTR & 20 LTR |
Category:
Synthetic Paint