EPOXY PAINT R 3:1 (1 ltr, 4 ltr , 20 ltr )

● Epoxy Red-Oxide Primer for Steel
● Epoxy Sealer for Wood and Concrete
● Zinc-Etch Primer for Aluminium and Galvanized Tops

FEATURES

Interior Application:

Water Resistance
● Moisture Resistance
● Solvent Resistance
● Salt Spray Resistance
● Acid Resistance
● Alkali Resistance
● Fast Drying
● Low VOC
● Poor Exterior Stability
● Poor Stability at Higher Temperature

SURFACE PREPARATION & MIXING INSTRUCTIONS

1. All surfaces must be dry ,clean and free from oil, grease,dirt loosse/flecking paint and other foreign substances.
2. Mix base PART A and Hardnere PART B separately with good agitation, and add hardnere PART B into base PART A and mix throughly until homogenous.
3. Allow the reaction to complete for about 15 min (induction time). if thinning is necessary, add thinner after 15min induction time.(mixing ratio of A : B in 3 : 1 ratio)

DRYING TIME

Drying Time at 30°C & 50 RH- Surface Dry 30 min., Tack Free 1.0 hrs., Hard Dry 6-8
Hrs. [Low temperature, High humidity, Thickness of film, and Poor Ventilation will increase
drying time]

USES

1. Interior furniture and equipment, chemical plants, pharmaceutical plants, textile plants,
   refineries and on concrete where chemical, oil, grease, water and maximum abrasion
   resistance are required.
2. Interior storage tank and structure.
3. In water storage tank and swimming pool where maximum water resistance is required.
4. In pharmaceutical industries where antifungal requirements are necessary. [Not
   recommended for application on exterior surfaces and places where temperature reaches above 70' C

Epoxy High Temp Specification

Product Description

Categories: Industrial Colour: Black Type: Solvent Based

We are a well-renowned organization in the industry to provide our patrons with the best quality of Epoxy Paint.

Mixing Instructions: Mix Base Part A and Hardener part B separately with good agitation, and add Hardener Part B into Base Part A and mix thoroughly until homogeneous, Allow the reaction to complete for about 15 min (induction time) If thinning is necessary, add thinner after 5 min (induction time)
Surface Preparation: All surfaces must be dry, clean and free from oil, grease, dirt, loose/flaking paint and other foreign substances

Feature: Temp Resistance Interior Application Water Resistance Moisture Resistance Solvent Resistance Acid Resistance Alkali Resistance Fast Drying Low VOC Poor Exterior Stability

Application: Best Application by Brush & Spray For large surface areas, rollers are more suitable fully Dry at 150C and above , Surface Dry 30 Minutes Track Free 1.0 Hours Hard Dry 6-8 Hours Low Temperature, High Humidity, Thickness of the film, and Poor Ventilation will increase the dry time

Specification:Finish-Semi-Glossy,Standard Colour-White and Industrial Colour, Practical Coverage-50-60 sq.ft./lit, it depends on the substrates and method of application% Age Solid-64-66%Solvent Type-Epoxy Thinner Vehicle Type-Epoxy Resin-Polyamide Curing Agent-Polyamine Curing Agent Clean-up Thinner-XyleneViscosity-80-100 Seconds in Ford cup B4 @300CRecommended # of Coats-1-2 Coates

Epoxy paint high solid Description

American Colour presents a top-tier, high-performance coating: the two-part solvent-based epoxycoating, formulated with a premium quality zinc phosphate base. This exceptional coating ismeticulously designed to offer maximum protection, effortless application, remarkable gloss,long-lasting color retention, excellent resistance to chemicals and water, as well as superb adhesionto metal, concrete, and wood surfaces. The product is conveniently available in a chemical ratio of R 3:1

Zinc Phosphate EP Primer American Colour Specification

Product Description

american colour's high-performance premium quality two-part solvent based ep coating is designed for maximum protection, easy application, outstanding gloss, color retention, chemical resistance, water resistance, and superb adhesion to metal, concrete, and wood. The product is available in a chemical ratio of 4:1.
finish type: smooth
practical coverage: 60-80 sq. Ft/ liter (depends on substrates and method of application
percentage solid (by weight): 80-85
specific gravity: 1. 4-1. 45
solvent type: epoxy thinner
vehicle type; epoxy resin, polyamide curing agent
clean-up thinner: xylene
viscosity: 110-120 seconds in ford cup b4 at 30°c
recommended # of coats: 1 - 2 coats
* price is inclusive of all taxes