Categories
Amecol Epoxy Floor sl- top coat Specification
Brand | American Colour |
Product Description
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic, dust-free and attractive floor finish that is suitable for a variety of industries. This three-component system consists of a carefully designed solventless epoxy resin composition, hardener and hard-wearing quartz fillers. It provides an extremely smooth, glossy or semi-glossy, hard-wearing and chemical-resistant floor topping.
PRODUCT BENEFITS :-Distinct advantages that make it an ideal choice for your flooring needs: High level of mechanical, chemical, water resistance Eco-friendly Low-VOC Low odour Low maintenance Antimicrobial
Easily cleanable
Additional Information
Packaging Details | PART A- 3.5 KG / PART B - 2 KG / PART C -0.5 KG / PART D-6 KG |
Floor Guard Specification
Brand | AMECOL |
Product Description
Epoxy Floor Guard SL
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic,
dust-free and attractive floor finish that is suitable for a variety of
industries. This three-component system consists of a carefully
designed solventless epoxy resin composition, hardener and
hard-wearing quartz fillers. It provides an extremely smooth, glossy
or semi-glossy, hard-wearing and chemical-resistant floor topping.
PRODUCT BENEFITS
Distinct advantages that make it an ideal choice for your flooring needs:
✅ High level of mechanical, chemical, water resistance
✅ Eco-friendly
✅ Low-VOC
✅ Low odour
✅ Low maintenance
✅ Antimicrobial
✅ Easily cleanable
PRODUCT FEATURES
COVERAGE
1.6 kg/m2 at 1 mm thickness
3.35 kg/m2 at 2 mm thickness
5.25 kg/m2 at 3 mm thickness
CURING
Initial cure in 6 hours
Full Mechanical Cure in 48 hours
Ready for use (To walk) in 24 hours
Ready for use (light traffic) in 48
hours
FINISH
✔ Gloss / Semi-gloss
AVAILABLE PACK
18 KG pack size:
Part A 4 kg
Part B 2 kg
Part C 12 kg
USES
Recommended for areas which require maximum hygiene, chemical resistance & dust-free environment like:
● Clean rooms
● Food processing
industries
● Soft drink bottling plants
● Nuclear plants, computer
and control panel rooms
● Pharmaceutical industries
● Airport hangers
● Chemical plants and
fertilizer processing units
● Electronic industries
● Textile mills
● Automobile servicing
and assembly areas
● Picture tube manufacturing plants
PROPERTIES
Application: Serrated Trowel
Mixing Ratio: As supplied
Pot Life at 30°C: 25-30 mins
Compressive strength
(ASTM C 579): 60 MPa
Hardness, Shore D (ASTM D
2240): 80
Taber Abrasion Loss/1000
Cycles: 45 mg
Flexural strength (ASTM C
580): 40 Mpa
Tensile strength (ASTM C 307): 30 MPa
ADDITIONAL INFORMATION
PRIMING
For use over a concrete surface,
FLOOR PRIME EP primer is
recommended depending on substrate
condition to ensure maximum product
performance.
MIXING
EPOXY FLOOR GUARD SL SKID
Pack components are pre-weighted for
optimum performance. Never split packs.
Part –A resin (4 kg) + Part –B Curing
agent (2 kg) mix for 1-2 minutes then add
aggregate (12 kg) mix 1-2 min with slow
speed and apply on the floor by trawler
with the thickness of 1-2 mm along with
the spike roller to release the air bubbles
for the smooth and compact surface
APPLICATION
EPOXY FLOOR GUARD SL shall be
mixed and applied only by specialist
flooring contractors who have been
trained in the correct application
procedures.
Epoxy Floor Gurad Sl Specification
Packaging Size | 6 kg ( PART A -4 KG , PART B - 2 KG ) |
Brand | AMERICAN COLOUR |
Type | Two Component Epoxy |
Product Description
American Colour's High-Performance premium quality two component 100% Solids Epoxy Floor Paint Ratio 2:1 It is designed for one coat application on interior concrete floor subjected to industrial chemicals and high abrasion. 100% Solids Epoxy will fill many hairline cracks and superficial concrete defects, producing a smooth and aesthetically pleasing high gloss finish. This product is for industrial/commercial use only and should be applied by professional contractors, knowledgeable in these types of coating systems.
Size:6 Kg ( PART A- 4KG + PART B- 2KG)
Type: Two Component Epoxy
Finish: Semi-Gloss Sheen
Percentage Solid: 99 %
Theoretical Spread Rate: 10 Sq.Ft for 1000 Microns, 20 Sq.Ft for 500 Microns , 100 SQ FT FOR 100 MICRON/ 1KG
Recommended Application: PUTTY PATRA
Thinner: N/A (Do Not Thin)
Clean-up Thinner: EPOXY THINNER
Tack Free: 7 Hrs.
Recoat: Between 12 and 24 Hrs.
Full Cure: 7 Days
*Price is inclusive of all taxes
Amecol Epoxy Floor sl- top coat Specification
Brand | American Colour |
Product Description
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic, dust-free and attractive floor finish that is suitable for a variety of industries. This three-component system consists of a carefully designed solventless epoxy resin composition, hardener and hard-wearing quartz fillers. It provides an extremely smooth, glossy or semi-glossy, hard-wearing and chemical-resistant floor topping.
PRODUCT BENEFITS :-Distinct advantages that make it an ideal choice for your flooring needs: High level of mechanical, chemical, water resistance Eco-friendly Low-VOC Low odour Low maintenance Antimicrobial
Easily cleanable
Additional Information
Packaging Details | PART A- 3.5 KG / PART B - 2 KG / PART C -0.5 KG / PART D-6 KG |
Floor Guard Specification
Brand | AMECOL |
Product Description
Epoxy Floor Guard SL
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic,
dust-free and attractive floor finish that is suitable for a variety of
industries. This three-component system consists of a carefully
designed solventless epoxy resin composition, hardener and
hard-wearing quartz fillers. It provides an extremely smooth, glossy
or semi-glossy, hard-wearing and chemical-resistant floor topping.
PRODUCT BENEFITS
Distinct advantages that make it an ideal choice for your flooring needs:
✅ High level of mechanical, chemical, water resistance
✅ Eco-friendly
✅ Low-VOC
✅ Low odour
✅ Low maintenance
✅ Antimicrobial
✅ Easily cleanable
PRODUCT FEATURES
COVERAGE
1.6 kg/m2 at 1 mm thickness
3.35 kg/m2 at 2 mm thickness
5.25 kg/m2 at 3 mm thickness
CURING
Initial cure in 6 hours
Full Mechanical Cure in 48 hours
Ready for use (To walk) in 24 hours
Ready for use (light traffic) in 48
hours
FINISH
✔ Gloss / Semi-gloss
AVAILABLE PACK
18 KG pack size:
Part A 4 kg
Part B 2 kg
Part C 12 kg
USES
Recommended for areas which require maximum hygiene, chemical resistance & dust-free environment like:
● Clean rooms
● Food processing
industries
● Soft drink bottling plants
● Nuclear plants, computer
and control panel rooms
● Pharmaceutical industries
● Airport hangers
● Chemical plants and
fertilizer processing units
● Electronic industries
● Textile mills
● Automobile servicing
and assembly areas
● Picture tube manufacturing plants
PROPERTIES
Application: Serrated Trowel
Mixing Ratio: As supplied
Pot Life at 30°C: 25-30 mins
Compressive strength
(ASTM C 579): 60 MPa
Hardness, Shore D (ASTM D
2240): 80
Taber Abrasion Loss/1000
Cycles: 45 mg
Flexural strength (ASTM C
580): 40 Mpa
Tensile strength (ASTM C 307): 30 MPa
ADDITIONAL INFORMATION
PRIMING
For use over a concrete surface,
FLOOR PRIME EP primer is
recommended depending on substrate
condition to ensure maximum product
performance.
MIXING
EPOXY FLOOR GUARD SL SKID
Pack components are pre-weighted for
optimum performance. Never split packs.
Part –A resin (4 kg) + Part –B Curing
agent (2 kg) mix for 1-2 minutes then add
aggregate (12 kg) mix 1-2 min with slow
speed and apply on the floor by trawler
with the thickness of 1-2 mm along with
the spike roller to release the air bubbles
for the smooth and compact surface
APPLICATION
EPOXY FLOOR GUARD SL shall be
mixed and applied only by specialist
flooring contractors who have been
trained in the correct application
procedures.
Epoxy Floor Gurad Sl Specification
Packaging Size | 6 kg ( PART A -4 KG , PART B - 2 KG ) |
Brand | AMERICAN COLOUR |
Type | Two Component Epoxy |
Product Description
American Colour's High-Performance premium quality two component 100% Solids Epoxy Floor Paint Ratio 2:1 It is designed for one coat application on interior concrete floor subjected to industrial chemicals and high abrasion. 100% Solids Epoxy will fill many hairline cracks and superficial concrete defects, producing a smooth and aesthetically pleasing high gloss finish. This product is for industrial/commercial use only and should be applied by professional contractors, knowledgeable in these types of coating systems.
Size:6 Kg ( PART A- 4KG + PART B- 2KG)
Type: Two Component Epoxy
Finish: Semi-Gloss Sheen
Percentage Solid: 99 %
Theoretical Spread Rate: 10 Sq.Ft for 1000 Microns, 20 Sq.Ft for 500 Microns , 100 SQ FT FOR 100 MICRON/ 1KG
Recommended Application: PUTTY PATRA
Thinner: N/A (Do Not Thin)
Clean-up Thinner: EPOXY THINNER
Tack Free: 7 Hrs.
Recoat: Between 12 and 24 Hrs.
Full Cure: 7 Days
*Price is inclusive of all taxes
Amecol Epoxy Floor sl- top coat Specification
Brand | American Colour |
Product Description
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic, dust-free and attractive floor finish that is suitable for a variety of industries. This three-component system consists of a carefully designed solventless epoxy resin composition, hardener and hard-wearing quartz fillers. It provides an extremely smooth, glossy or semi-glossy, hard-wearing and chemical-resistant floor topping.
PRODUCT BENEFITS :-Distinct advantages that make it an ideal choice for your flooring needs: High level of mechanical, chemical, water resistance Eco-friendly Low-VOC Low odour Low maintenance Antimicrobial
Easily cleanable
Additional Information
Packaging Details | PART A- 3.5 KG / PART B - 2 KG / PART C -0.5 KG / PART D-6 KG |
Floor Guard Specification
Brand | AMECOL |
Product Description
Epoxy Floor Guard SL
EPOXY FLOOR GUARD SL the ideal solution for creating a hygienic,
dust-free and attractive floor finish that is suitable for a variety of
industries. This three-component system consists of a carefully
designed solventless epoxy resin composition, hardener and
hard-wearing quartz fillers. It provides an extremely smooth, glossy
or semi-glossy, hard-wearing and chemical-resistant floor topping.
PRODUCT BENEFITS
Distinct advantages that make it an ideal choice for your flooring needs:
✅ High level of mechanical, chemical, water resistance
✅ Eco-friendly
✅ Low-VOC
✅ Low odour
✅ Low maintenance
✅ Antimicrobial
✅ Easily cleanable
PRODUCT FEATURES
COVERAGE
1.6 kg/m2 at 1 mm thickness
3.35 kg/m2 at 2 mm thickness
5.25 kg/m2 at 3 mm thickness
CURING
Initial cure in 6 hours
Full Mechanical Cure in 48 hours
Ready for use (To walk) in 24 hours
Ready for use (light traffic) in 48
hours
FINISH
✔ Gloss / Semi-gloss
AVAILABLE PACK
18 KG pack size:
Part A 4 kg
Part B 2 kg
Part C 12 kg
USES
Recommended for areas which require maximum hygiene, chemical resistance & dust-free environment like:
● Clean rooms
● Food processing
industries
● Soft drink bottling plants
● Nuclear plants, computer
and control panel rooms
● Pharmaceutical industries
● Airport hangers
● Chemical plants and
fertilizer processing units
● Electronic industries
● Textile mills
● Automobile servicing
and assembly areas
● Picture tube manufacturing plants
PROPERTIES
Application: Serrated Trowel
Mixing Ratio: As supplied
Pot Life at 30°C: 25-30 mins
Compressive strength
(ASTM C 579): 60 MPa
Hardness, Shore D (ASTM D
2240): 80
Taber Abrasion Loss/1000
Cycles: 45 mg
Flexural strength (ASTM C
580): 40 Mpa
Tensile strength (ASTM C 307): 30 MPa
ADDITIONAL INFORMATION
PRIMING
For use over a concrete surface,
FLOOR PRIME EP primer is
recommended depending on substrate
condition to ensure maximum product
performance.
MIXING
EPOXY FLOOR GUARD SL SKID
Pack components are pre-weighted for
optimum performance. Never split packs.
Part –A resin (4 kg) + Part –B Curing
agent (2 kg) mix for 1-2 minutes then add
aggregate (12 kg) mix 1-2 min with slow
speed and apply on the floor by trawler
with the thickness of 1-2 mm along with
the spike roller to release the air bubbles
for the smooth and compact surface
APPLICATION
EPOXY FLOOR GUARD SL shall be
mixed and applied only by specialist
flooring contractors who have been
trained in the correct application
procedures.
Epoxy Floor Gurad Sl Specification
Packaging Size | 6 kg ( PART A -4 KG , PART B - 2 KG ) |
Brand | AMERICAN COLOUR |
Type | Two Component Epoxy |
Product Description
American Colour's High-Performance premium quality two component 100% Solids Epoxy Floor Paint Ratio 2:1 It is designed for one coat application on interior concrete floor subjected to industrial chemicals and high abrasion. 100% Solids Epoxy will fill many hairline cracks and superficial concrete defects, producing a smooth and aesthetically pleasing high gloss finish. This product is for industrial/commercial use only and should be applied by professional contractors, knowledgeable in these types of coating systems.
Size:6 Kg ( PART A- 4KG + PART B- 2KG)
Type: Two Component Epoxy
Finish: Semi-Gloss Sheen
Percentage Solid: 99 %
Theoretical Spread Rate: 10 Sq.Ft for 1000 Microns, 20 Sq.Ft for 500 Microns , 100 SQ FT FOR 100 MICRON/ 1KG
Recommended Application: PUTTY PATRA
Thinner: N/A (Do Not Thin)
Clean-up Thinner: EPOXY THINNER
Tack Free: 7 Hrs.
Recoat: Between 12 and 24 Hrs.
Full Cure: 7 Days
*Price is inclusive of all taxes