PU Paint 1 Ltr and 4 Ltr Specification

● House furniture
● Excellent for wood, metal, & aluminum

SURFACE PREPARATION & MIXING INSTRUCTIONS

1. Prepare the surface: Ensure that the surface to be coated is clean and primed with a
   suitable sealer or primer.
2. Clean and sand the surface: Thoroughly clean the surface, removing any dust, oil, water, or
   other contaminants. Additionally, sand the surface well to create a smooth and even base.
3. Apply the first coats: On the well-prepared surface, apply 1 to 2 coats of PU AUTO GLOSS
   PAINT. Apply the paint in both horizontal and vertical strokes to ensure even coverage.
4. Sand for a perfect finish: Once the initial coats have dried, use a very fine sandpaper to
   lightly sand the surface. This step helps to achieve a flawless finish. After sanding, remove
   any dust or debris from the surface.
5. Repeat the top coating process: Apply another coat of PU AUTO MATT PAINT to the
   sanded surface. Follow the same technique of applying the paint in horizontal and vertical
   strokes.

ADDITIONAL INFORMATION

1. CLEANING OF TOOLS

All tools should be cleaned with Wash Thinner or PU Super Thinner as soon as possible.

2. STORAGE CONDITIONS

Shelf life of 12 months minimum if stored below 25'C

3. PRECAUTIONS

PU AUTO GLOSS PAINT R 3:1 and PU HARDNER do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU AUTO GLOSS PAINT is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.

Polyurethane Paints R 3:1 (RAL & Special Shades) Specification

American Colour’s High-Performance Polyurethane has two components: Part A is mostly
Acrylic Resin and/or Polyester Resin, and Part B is ALIPHATIC HARDENER or Convertor.
Polyurethane provides superior gloss and colour retention, exhibiting a very high gloss wet
look finish. Polyurethane also has excellent flexibility, chemical, and abrasion resistance.

PRODUCT BENEFITS

• Exterior & Interior Application
• Weather Resistance
• Moisture Resistance
• Solvent Resistance
• Salt Spray Resistance
• Fresh Water Resistance
• Abrasion Resistance
• Oil & Grease Resistance
• Alkali Resistance
• Acid Resistance
• Fast Drying

USES

• Interior and Exterior wood surface
• Exterior and Interior Industrial application,
• Automobile and Commercial Transportation Vehicles, Aircraft and Farm Machinery,Oil Field Drilling and Service Equipment.
• This aliphatic urethane product is also used as a chemical resistance and gloss retentive finish over epoxy and zinc rich
• primer (For Galvanize use Zinc-Etch Primer)

SURFACE PREPARATION & MIXING INSTRUCTIONS

1. All surfaces must be sound, dry, clean and free from oil, grease, dirt, loose/flecking paint,
   and other foreign substances
2. Mix Base Part A and add Hardener Part B into Base Part A and mix thoroughly until
   homogeneous. Allow mixture to react in the can for about 5 minutes (induction time) and
   add around 40% thinner.
3. Be mindful of water in the compressor air line because hardener is more sensitive to water,
   it will become hard very fast. Mixing ratio of A:B is available in PU Paint R 3:1

DRYING TIME

Drying Time at 30°C & 50 RH- Surface Dry 10 min., Tack Free 25 min., Hard Dry
4-6 Hrs. [Low temperature, High humidity, Thickness of film, and Poor Ventilation
will increase drying time]

Polyurethane Paint R 3 : 1 Specification

Product Description

American colour's high performance polyurethane has two components : Part A is mostly Acrylic resin and or polyester resin , and Part B is ALPHATIC HARDENER or convertor. Polyurethane provides superior gloss and colour retention,exhibiting a very high gloss wet look finish. Polyurethane also has excellent flexibility , chemical and abrasion resistance .

Other details:

• Aliphatic urethane has two components: Part A is mostly Acrylic Resin and/or Polyester Resin and Part B is Hardener or Converter
• Aliphatic urethane provides superior gloss and colour retention, exhibiting a very high gloss wet look finish
• Aliphatic urethane also has excellent flexibility, chemical, and abrasion resistance
• It is available in white, blue, red, green, and almost all furniture & industrial colours

Primer Recommendations:PU Primer for Mild Steel, Aluminum, GI and plastic surface,( PU primer have ability to adhere like single bond with all most all the surface

· Surface Preparation:All surfaces must be sound, dry, clean and free from oil, grease, dirt, loose/flecking paint and other foreign substances

Mixing Instruction:

• Take care of water in compressor air line because hardener is more sensitive to water, it will become hard very fast
• Mixing ratio of A:B is available in 3:1 and Primer in 4:1

Features (Non-Immersion):

• Exterior and Interior Application
• Weather Resistance
• Moisture Resistance
• Solvent Resistance
• Salt Spray Resistance
• Fresh Water Resistance
• Abrasion Resistance
• Oil & Grease Resistance
• Acid Resistance
• Alkali Resistance
• Fast Drying

Uses:

• For Industrial and Processing Equipment
• Exterior and Interior Storage Tank Structures
• Automobile and Commercial Transportation Vehicles
• Aircraft and Farm Machinery
• Oil Field drilling and Service Equipment
• For chemical resistance and gloss retentive finish over epoxy and zinc rich primer (For Galvanization use Zinc-Itch Primer)

Drying Time at 30 DegreeC & 50 RH:

· Surface Dry 10 Minutes

· Tack Free 25 Minutes

· Hard Dry 4-6 Hours

· Low Temperature, High Humidity, Thickness of the film, and Poor Ventilation will increase the dry time.

Technical Description:

PU Paint 1 Ltr and 4 Ltr Specification

● House furniture
● Excellent for wood, metal, & aluminum

SURFACE PREPARATION & MIXING INSTRUCTIONS

1. Prepare the surface: Ensure that the surface to be coated is clean and primed with a
   suitable sealer or primer.
2. Clean and sand the surface: Thoroughly clean the surface, removing any dust, oil, water, or
   other contaminants. Additionally, sand the surface well to create a smooth and even base.
3. Apply the first coats: On the well-prepared surface, apply 1 to 2 coats of PU AUTO MATT
   PAINT. Apply the paint in both horizontal and vertical strokes to ensure even coverage.
4. Sand for a perfect finish: Once the initial coats have dried, use a very fine sandpaper to
   lightly sand the surface. This step helps to achieve a flawless finish. After sanding, remove
   any dust or debris from the surface.
5. Repeat the top coating process: Apply another coat of PU AUTO MATT PAINT to the
   sanded surface. Follow the same technique of applying the paint in horizontal and vertical
   strokes.
   

ADDITIONAL INFORMATION :

1. CLEANING OF TOOLS :
   All tools should be cleaned with Wash Thinner or PU Super thinner as soon as possible.
   
2. STORAGE CONDITIONS :
   Shelf life of 12 months minimum if stored below 25'C.
   
3. PRECAUTIONS :
   PU AUTO MATT PAINT R 3:1 and PU HARDNER do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU AUTO MATT PAINT is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.