PU PAINT AUTO WHITE GLOSS R 3:1(1 LTR KIT, 4 LTR KIT)
Amecol Spray Paint Black Matt,380 Gram
₹767/1 ltr , 2832/ 4ltr
380 Gram
PU PAINT AUTO WHITE GLOSS R 3:1(1 LTR KIT, 4 LTR KIT)
| Brand | American Colour |
| Packaging Sizes | 1 LTR AND 4 LTR |
| Packaging Type | Tin |
| Appearance | Free flow colored liquid |
| Thinner | PU Thinner |
| Flash point | 20’c |
| Viscosity @ 30’C | 120 +/- 10 SECOND |
| Solid content | 63% |
| Application Condition: Air temperature | 10 to 40’C |
| Application method | Brush, roller or spray |
| Mixing/Dilution Ratio ( 13-15” FC # 4) | Base:Hardener:Thinner 30 10 20- 30 |
| Pot life | 1 ~ 3 hrs. |
| Drying time: Dust free Touch dry Hard dry Recoat | 15-20’ 30-45’ 2-3 hrs After 12 hrs |
| Coverage | 50 to 60 sqft/ ltr |
| Pencil hardness | HB-H |
| Recoating | One coat may be sufficient for ordinary finish. However, one additional coat can be applied wet on wet if necessary. Light sanding with 400 ~ 600 mesh sandpaper is recommended before subsequent coat when recoating time exceeds 3 hrs and remove traces of wax |
● House furniture
● Excellent for wood, metal, & aluminum
SURFACE PREPARATION & MIXING INSTRUCTIONS
- Prepare the surface: Ensure that the surface to be coated is clean and primed with a
suitable sealer or primer.
- Prepare the surface: Ensure that the surface to be coated is clean and primed with a
- Clean and sand the surface: Thoroughly clean the surface, removing any dust, oil, water, or
other contaminants. Additionally, sand the surface well to create a smooth and even base.
- Clean and sand the surface: Thoroughly clean the surface, removing any dust, oil, water, or
- Apply the first coats: On the well-prepared surface, apply 1 to 2 coats of PU AUTO GLOSS
PAINT. Apply the paint in both horizontal and vertical strokes to ensure even coverage.
- Apply the first coats: On the well-prepared surface, apply 1 to 2 coats of PU AUTO GLOSS
- Sand for a perfect finish: Once the initial coats have dried, use a very fine sandpaper to
lightly sand the surface. This step helps to achieve a flawless finish. After sanding, remove
any dust or debris from the surface.
- Sand for a perfect finish: Once the initial coats have dried, use a very fine sandpaper to
- Repeat the top coating process: Apply another coat of PU AUTO MATT PAINT to the
sanded surface. Follow the same technique of applying the paint in horizontal and vertical
strokes.
- Repeat the top coating process: Apply another coat of PU AUTO MATT PAINT to the
ADDITIONAL INFORMATION
- CLEANING OF TOOLS
All tools should be cleaned with Wash Thinner or PU Super Thinner as soon as possible.
2. STORAGE CONDITIONS
Shelf life of 12 months minimum if stored below 25’C
3. PRECAUTIONS
PU AUTO GLOSS PAINT R 3:1 and PU HARDNER do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment. PU AUTO GLOSS PAINT is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advice.
Category: PU-PAINTS
